Zeiss Primo Star Mode D'emploi page 15

Primo Star / Primo Star iLED Start-Up and Operation Carl Zeiss
When using the IEC adapter, the plug-in power unit can be fixed for transportation purposes to the back
®
of the microscope stand by means of the supplied two self-adhesive hooks and the Velcro strip:
• Pull the Velcro
®
strip (Fig. 6/2) through the brackets of the hooks (Fig. 6/1).
• Stick the hooks (Fig. 6/1) together with the Velcro
®
strip to the recess (above on the right and left,
respectively) at the back of the stand.
• Insert the plug-in power unit (Fig. 6/3) and close the Velcro
®
strip.
Fig. 6 Fixing the plug-in power unit with IEC adapter to the stand
M60-2-0011 v 08/2008 15