3M 8517701 Manuel page 15

6.3 STORAGE AND TRANSPORT: The C-Frame FAS is designed to be stored outdoors during normal weather conditions.
If the weather is severe, it is recommended to store the system in an area that protects against damage to the system.
Store the C-Frame FAS and associated fall protection equipment in a cool, dry, clean environment out of direct sunlight.
Avoid areas where chemical vapors may exist. Thoroughly inspect components after extended storage. If the system is
transported long distances, it should be disassembled and all components secured and protected from severe conditions
during transport.
;
When transporting the C-Frame FAS, do not exceed transport speeds of 5.0 mph (8.0 km/h).
7.0 LABELS
Figure 12 illustrates labels on the C-Frame FAS. All labels must be present and should be replaced if they are not fully
legible.
15