3M 8517701 Manuel page 10

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
PRODUCT DESCRIPTION:
Figure 1 illustrates the Flexiguard
anchorage connections for up to two people. They are intended for use as anchorages in a Personal Fall Arrest System (PFAS).
Figure 2 illustrates components of the C-Frame FAS. See Table 1 for component identification and specifications. A Trolley Rail
assembly (A) is supported by adjustable & non-adjustable Upright Assemblies (B) and Trolley Rail Supports (C). Four-Wheeled
Trolleys (D) travel back and forth in the Trolley Rail Halves. Each Trolley has a connection point for connection of a Self-
Retracting Device or Energy Absorbing Lanyard. The C-Frame Bases (E) are equipped with swiveling Pneumatic or Caster Wheels
(F) and Transport Handles (G) for transporting and positioning the system. The Drive Mech (H) enables raising and lowering of
the adjustable C-Frame systems. Outriggers (I) with locking Caster Wheels (J) or non-swiveling Pneumatic Wheels stabilize the
system during transport and use. Leveling Jacks (K) and Bubble Levels (L) are used to level the system and prevent roll during
use. The Transport Wheels Kit (M) is sold separately and is designed to replace the existing front caster wheels for use when
towing the system across long distances. The Tow Bar (N) is sold separately and enables transportation of the C-Frame FAS with
a vehicle.
Performance Specifications:
Capacity: 2 Trolleys per Trolley Rail: 1 Person per Trolley with a combined weight (clothing, tools, etc.) less than or equal to
310 lbs (140.6 kg).
Anchorage: The structure to which the Anchorage Connector is attached must sustain loads applied in the directions permitted
by the Fall Arrest System of at least 3,600 lbs (1,633 kg) plus the weight of the system.
Dimensions: See Figure 1 for the dimensions of each C-Frame FAS model.
Weight: 8517701: 1,650 lbs (749 kg)
8517703: 1,970 lbs (893 kg)
8517705: 2,097 lbs (951 kg)
8517707: 2,104 lbs (954 kg)
8517709: 2,232 lbs (1,012 kg)
8517711: 2,238 lbs (1,015 kg)
8517713: 2,366 lbs (1,073 kg)
8530842: 1,450 lbs (658 kg)
8530843: 1,500 lbs (680 kg)
8530844: 1,600 lbs (725 kg)
8530845: 1,650 lbs (749 kg)
Component Specifications:
Figure 2
Reference Component
Trolley Rail
A
Upright Assembly
B
Trolley Rail Support
C
4-Wheeled Trolley
D
C-Frame Base
E
F Pneumatic Wheels
Transport Handles
G
H Drive Mech
I Outrigger
J Caster Wheels
K Leveling Jacks
L
Bubble Level
M Transport Wheels Kit - 8530841
N Tow Bar Kit - 8518243 (sold separately)
1
1 Qualified Person: A person with a recognized degree of professional certificate and with extensive knowledge, training, and experience in the fall protection and rescue field
who is capable of designing, analyzing, evaluating, and specifying fall protections and rescue systems to the extent required by OSHA and other applicable standards.
C-Frame Fall Arrest System (FAS). C-Frame FAS are fall protection systems with overhead
®
Table 1 – Specifications
Materials
Aluminum
Tubes - Aluminum
Plates - Aluminum
Carriage Housing - Steel
Carriage Rollers - Nylatron
Chain Roller - Acetal
Tubes - Aluminum
Bars - Aluminum
Gussets - Stainless Steel with EPDM cover
Wheels - Nylon
Bearings - Steel
5/8" Connection Eye - Stainless Steel
Tubes - Aluminum
Plates - Aluminum
Rubber - Foam-filled
Tube - Steel
Handles - Rubber
Steel; aluminum
Aluminum
Wheels - Urethane
Mounting Tube - Aluminum.
Steel
Plastic
Rubber - Foam-filled
Aluminum; steel
10