Dreve FotoDent flash Mode D'emploi page 26

FotoDent
Generating a program/editing a program
Chose the menu item "Generating a
program" in the main menu by using
the arrow keys and confirm the choice
with „OK". The following display is
now shown:
00:00
00:00
Time for pre-gassing
Time for the first light
exposure process
Interval between the first and
second light exposure process
Time for the second light
exposure process
Save programme
Select a particular parameter of the pro-
gram with "OK". According to the current
parameter of the program you have to
give in the desired duration by using the
arrow keys. If one parameter should be
dropped, set the duration on 00 minutes,
00 seconds. After running through all
necessary parameters the symbol disk is
blinking to save the parameters.
Press "OK", „No" is blinking. Choose
the desired option by using the arrow
keys, confirm with ok.
INFO
The light exposure times mentioned
in the list represent a recommenda-
26
flash
®
1
00:00 00:00
2
yes/no
tion for the respective Dreve Dentamid
products.
Product Light exposure (1)
FotoDent guide
®
FotoDent cast
®
FotoDent model
®
FotoDent tray
®
FotoDent gingiva
®
FotoDent denture
®
If you chose "Yes", you have to choose
the storage space in the next step. There
are 10 spaces available for saving, the
corresponding number of the storage
space appears, as soon as the program is
stored in this space. Later on, the program
can be recalled any time by this number.
Confirm the selection of the storage
space with "OK". Afterwards, the menu
for selecting the program appears.
Select the last saved program by select-
ing the before chosen storage space.
For the changing of a program select in
the chosen program "change" by using
the arrow keys and confirm with "OK".
Now shown is the menu for the input
of the parameters of the program. The
saving of changes happens according to
the storage of a new program.
After selecting the service menu the dis-
play shows the following:
P1 P2 P3 P4 P5
P6 P7 P8 P9 P10
10 min
10 min
12 min
12 min
12 min
12 min