Selecting A Program - Dreve FotoDent flash Mode D'emploi

Selecting a program

Select the menu item „select program"
by using the arrow keys. Confirm with
"OK". The display now shows the stor-
age spaces, provided that there are pro-
grams stored yet:
P1 P2 P3 P4 P5
P6 P7 P8 P9 P10
Select the needed program with the
arrow keys and confirm with "OK". The
parameter of the program are shown in
the display:
T: 20 C
o
1
01:00 04:00
04:00
00:00
The total time display of the chosen
program is blinking. Confirm the start
of the program with „OK". The Display
shows "lid open":
Open the lid and put the object onto
the glass plate of the polymerisation
chamber. Close the unit. The lighting
process starts automatically according
to the given parameters. The total time
is counted down during the lighting
process, "Abort"(Cancel) is blinking.
After the program has expired the dis-
play shows that the drawer is open. Get
back to the selection menu by pressing
"OK " for some seconds.
INFO
If the program has been started by acci-
dent, it can be terminated ahead of time
by pushing "Abort" (cancel).
In the running program the function
"Abort" (cancel) is pre-selected and
blinking.
00:00
Cancel the program by pressing "OK"
abort
very long (ca. 2 seconds). Again, the
change
selection display is shown.
Changes of the parameters of the pro-
gram cannot be made while the pro-
gram is running.
INFO
If the program has to be quit with-
out starting it, the "OK" key has to be
pressed for about 2 seconds. Afterwards
the starting menu is shown again.
25