Proper Use; Features And Equipment; Included Items; Technical Data - Parkside PEH 30 B2 Instructions D'utilisation Et Consignes De Sécurité

Introduction
Electric planer PEH 30 B2
Introduction
●
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use are
part of the product. They contain important
information concerning safety, use and
disposal. Before using the product, please
familiarise yourself with all of the safety
information and instructions for use. Only use
the unit as described and for the specified
applications. If you pass the product on to
anyone else, please ensure that you
also pass on all the documentation with it.

Proper use

●
The device is suitable for planing wood in
the form of beams or boards or the like if
the workpiece is held securely in a fixed
position. The device is also suitable for
chamfering edges and for rebating.
Any other use or modification to the device
shall be considered as improper use and
could give rise to considerable risk of
accident. The manufacturer will not accept
liability for loss or damage arising from
improper use. Not suitable for commercial
use.

Features and equipment

●
Safety lock-out
1
ON / OFF switch
2
Planing debris removal port (right / left
3
selectable)
Belt cover
4
Belt cover screws
5
Guide fence
6
Guide fence fixing screw
7
Fixing nut for setting rebate width
8
Sole
9
V-groove
10
Rebate depth stop fixing screw
11
Rebate depth stop
12
54 GB / IE / NI
Rotary control for setting planing depth
13
(auxiliary handle)
Cutting depth scale
14
Vacuum cleaner adapter
15
Parking shoe
16
Blade shaft
17
Cutting element
18
Plane blade fixing screws
19
Plane blade
20
Side blade shaft guard
21
Hex key
22
Drive belt
23
Large belt wheel
24
Small belt wheel
25
Open spanner
26
Hex srews
27

Included items

●
1 Electric planer PEH 30 B2
1 Guide fence
1 Rebate depth stop
1 Hex key
1 Open spanner
1 Vacuum cleaner adapter
1 Operating instructions

Technical data

●
Rated voltage:
Rated power:
No-load rotation speed: n
Planing width:
Depth of cut:
Rebate depth:
Protection class:
Noise and vibration data:
Measured values for noise are determined in
accordance with EN 60745. The A-weighted
noise level of the electrical power tool are
typically:
Sound pressure level:
Sound power level:
Uncertainty K:
230–240 V~ 50 Hz
750 W
13000 min ¯ ¹
0
82 mm
0–3 mm
max. 24 mm
II/
88.4 dB(A)
99.4 dB(A)
3 dB