Introduction; Intended Use; Features; Package Contents - Parkside PLHLG 2000 A1 Traduction Des Instructions D'origine

LONG-HANDLED HEAT GUN
PLHLG 2000 A1

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .

Intended use

The appliance is suitable for the removal of wild
growth between paving slabs, on brick-paved areas,
on walling, in flowerbeds and in lawns during the
growth periods, for the removal of paintwork, for
heating (e .g . of heat-shrinkable tubing) and for the
deformation and welding of plastics . It can also be
used for separating glued joints, thawing frozen
pipes and lighting barbecues . Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse . This appliance
is not intended for commercial use .
■ 12 │ GB │ IE
All manuals and user guides at all-guides.com

Features

Mains plug
Cable holder
Locking device for extension handle
Cable clips for mains cable
Filling nozzle
Flat nozzle
Reducer nozzle
Barbecue nozzle
Locking device for extension handle
Handle (hot air blower)
ON/OFF switch
Locking knob for rotating handle
Hot air nozzle
Cone nozzle
Temperature switch
Stand
Extension handle
Handle (extension)

Package contents

1 long-handled heat gun
1 cone nozzle
1 filling nozzle
1 flat nozzle
1 reducer nozzle
1 barbecue nozzle
1 set of operating instructions

Technical data

Rated voltage:
Rated power consumption:
Air flow:
Temperature heating level 1
(nozzle outlet):
Temperature heating level 2
(nozzle outlet):
Temperature heating level 3
(nozzle outlet):
Protection class:
230 V ~ 50 Hz
(AC)
2000 W
500 l/min
approx . 100°C
approx . 350°C
approx . 650°C
II / (double
insulation)
PLHLG 2000 A1