GYS GYSFLACH 3.48 PL Mode D'emploi page 8

Translation of the original manual
• Always ensure the Red clamp is connected to the «+»
battery terminal first. If it is necessary to connect the black
clamp to the vehicle chassis, make sure it is a safe distance
from the battery and the fuel line. The charger must then be
plugged into the mains.
then disconnect the negative clamp from the body of the car
and then disconnect the positive clamp from the battery, in
this order.
Connection :
• Class II device
Maintenance :
• If the power cable is damaged, it must be replaced by the
manufacturer, its after sales or by an equally qualified person
to prevent any accidents.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website..
• EAEC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British
Declaration of Conformity is available on our website (see home
page).
• Equipment in conformity with Moroccan standards. The
declaration C‫( م‬CMIM) of conformity is available on our
website (see cover page).
Waste management:
• This product should be disposed of at an appropriate
recycling facility. Do not throw away in a household bin.
GENERAL DESCRIPTION
GYSflash 3.48PL is ideal for charging most lead-acid (Gel, AGM, Liquid,...) and lithium batteries of the Lithium Iron Phosphate (LFP
/ LiFePO4) and «standard» lithium-ion types such as Nickel Manganese Cobalt (NMC), Lithium nickel cobalt aluminium oxide (NCA),
Lithium Cobalt Oxide (LCO), Lithium Polymer (Li-Po), Lithium Manganese Cobalt Oxide (MCO) etc.
This charger is perfectly suitable to charge :
- 48V lead-acid batteries (24 cells in series)
- LFP 48V batteries (15 cells in series)
- LFP 48V batteries (16 cells in series)
- 48V «standard» Lithium-ion batteries (13 cells in series)
- 48V «standard» Lithium-ion batteries (14 cells in series)
8 8
• After charging, disconnect the charger from the mains,
The GYSFLASH 3.48 PL is equipped with an integrated temperature sensor that ensures that the charging
current is adapted to the ambient temperature for an optimal charging performance when charging a lead-
acid battery. This adjustment ensures a highly precise charge, relative to the temperature of the room.
GYSFLASH 3.48 PL
EN