hergom CRETA Instructions D'installation, De Service Et De Maintenance page 40

3
Provisionally screw in the
lower section of the
telescopic tube so that you
can work inside the lower
part of the same and slide it
towards the ceiling.
FASTEN THE BODY OF
THE STOVE TO THE
INSIDE TUBE
Capscrew
M6x12
DIN914
Before completing the work it is recommended to test the appliance by lighting it to
ensure that it is correctly installed and that it works well. When you follow this
recommendation try to prevent any problems from arising when the fire is lit for the
first time which could require the installation to be checked.
4
Screw the telescopic tube
to the support or the ceiling
1
Screw the inside tube to the
neck of the chimney from
the lower part of the same.
Seal the join with heat
resistant putty
2
Pull down the lower part
of the tube until it
reaches its final poition.
40
Leave the last section of
the tube (approx. 100 mm)
free.