hergom CRETA Instructions D'installation, De Service Et De Maintenance page 23

The main characteristics of the Crete stove are:
- Enclosed stove made out of sheets of stainless steel.
- The base has a device to regulate the entrance of primary air which
circulates round the ash pan.
A complementary conical deflector.
-
The deflector has a draft regulating device.
-
An interior sheet of stainless steel to protect the stove.
-
Door with a glass pane.
-
The body of the stove is fastened to the wall (depending on the model).
-
No unauthorised changes may be made to the stove. This stove has been
designed, tested and certified as supplied by the manufacturer. Industrias Hergóm
may not be held liabable if a stove does not work, is broken or damaged due to the
fact that changes have been made to it by the user or the installer.
1.- PRESENTATION
Telescopic tube
Decorative tube
Hood
Interior plate
for protecting
the stove
Door with
glass pane
Support plate
to fasten the
stove to the
wall
Cone shaped
complementary deflector
Fig.-1
23
Primary air valves