hergom CRETA Instructions D'installation, De Service Et De Maintenance page 22

To the HERGÓM family. Thank you for choosing our Crete stove.
We are sure that your new stove will give you great satisfaction.
To possess a HERGOM STOVE shows exceptionally good taste.
So that you are familiar with your stove please read the entire manual, especially the
regulations on its installation, operation and maintenance, which you will find very useful.
Keep it in a safe place and refer to it whenever necessary. If, after reading this manual,
you require any further clarification please do not hesitate to contact your supplier or to
call the manufacturer directly.
IMPORTANT. If your stove is incorrectly installed it won't give you the excellent service
that you expect from a HERGOM stove. Please read these instructions fully and give the
work to a specialist.
The surface of your wrought iron stove is protected by heat resistant paint which is
specially designed for high temperatures. When you light your stove for the first few times
there will probably be some smoke, caused by solvents evaporating which allows the paint
to dry and take form. Due to this we recommend that you air the room until the smoke
disappears.
I.- PRESENTATION...........................................................................
II.- INSTALLATION..............................................................................
A.- Assembly.
B.- Chimneys.
IlI.- LIGHTING UP AND POWER CONTROL .....................................
A.- The first time you light up
lV.- CLEANING....................................................................................
A.- Cleaning out the ashes
V .- SAFETY......................................................................................
VI .- PRODUCTS TO HELP YOU CARE FOR YOUR STOVE .............
VIl.- TECHNICAL SPECIFICATIONS....................................................
Vlll .- COMPONENTS OF THE STOVE AND ASSEMBLY
INSTRUCTIONS FOR THE CRETE WALL FASTENED MODEL ...........
lX .- COMPONENTS OF THE STOVE AND ASSEMBLY
INSTRUCTIONS FOR THE CRETE HANGING MODEL .......................
X.- PLATE SHOWING THE TECHNICAL SPECIFICATIONS .............
WELCOME
CONTENTS
Chapter
1.- How chimneys work
2.- Formation of soot and how the chimney is cleaned
3.- Options
4.- Regulations
22
Page
23
24
29
30
31
32
33
35
38
104