Operation Of The Product - Sonnenkonig BLACK 12 Mode D'emploi

•
Fix the blade into place by gently hand-tightening the spinner anticlockwise onto the
end of the motor spindle. The spinner is self-tightening, so do not force it.
•
Lift up all locking clips on the front safety grille.
•
Place the safety grille into position and secure it by fastening the clips over the outer
rim. The screw and nut at the bottom of the grille must be fitted.

4 Operation of the product

Caution:
•
Select a suitable location for the fan. Always choose a safe location in accordance
with the safety recommendations outlined.
•
When placing a fan on a table or shelf, always ensure that the power cord does not
hang where it can accidentally be pulled out and that the unit cannot accidentally fall
down.
•
Do not hang or mount the fan on a wall or ceiling.
•
Remove the cable tie and unravel the cord set before operation.
•
To blow air in one direction and stop oscillation, allow the Table Fan to move into
the desired position and pull the oscillating knob up. To return to a normal oscillating
function, press the oscillating knob down.
1. On/Off and Speed Control
On/Off and Speed is controlled by the rotating switch.
0– the fan is switched off, 1– the lowest speed, 2– medium speed, 3– the highest speed
2. Angle Adjustment
Switch off the fan. Adjust the fan to the desired angle by hand.
31
GB