Operation Instructions - Sonnenkonig WINDMASCHINE 18 OSC Notice D'utilisation

4 Operation instructions

• Ensure that the voltage used corresponds with the voltage indicated.
• Turn the speed control to select the speed:
0 (off) and speeds
1, 2, 3 mean slow,
medium, fast.
• The Oscillation Knob is located on the head of the fan. Press the clutch knob down to
activate the oscillating function. The fan head will swing from side to side whilst blowing
air.
• To stop oscillation, allow the Fan head to move into the desired position and then pull
the clutch knob up.
• Never touch the blades with your hands or any object!
• Do not pull the cord too hard. If is damaged after extensive use, get it repaired by an
authorized electrician.
• To clean it: Disconnect the power cord from the mains. Remove the guard and the blades
carefully. Do not drop the blades! First use a soft cloth with a little bit of soap to clean
off oil stains. Then wipe and polish with a dry cloth. Never use a cleaning agent or any
corrosive liquid that will damage the paint, metal or plastic! Put back the blades and
lock the guard securely before use.
• To mount on it walls, ensure that strong, durable tools are used. Make sure holes are
properly drilled and the fan is firmly fixed to the wall to support the weight of the fan.
No exchange will be made if the above instructions are not followed. Always test the
product first before purchase.
36