Sonnenkonig SECCO 200 Manuel De L'utilisateur page 65

Note
1� DO not remove the float from the water tank� The wa-
ter full sensor will no longer be able to detect the wa-
ter level correctly without the float and water may leak
from the water tank�
2� If the drainage tank is dirty, wash it with cold or lukewarm water� Do not
use detergent, scouring pads, chemically treated dust cloths, gasoline, ben-
zene, thinner, or other solvents, as these can scratch and damage the tank
and cause water leakage�
EN
3� When replacing the drainage tank, press the tank firmly into place with
both hands� If the tank is not positioned properly, the "TANK FULL" sensor
will be activated, and the dehumidifier will not operate�
Continuous Water Drainage
The unit features a continuous drainage port � Using a plastic pipe (with an
inner diameter of 9 mm) tthe water in the drainage tank can be continuously
drained through the continuous drainage port on the unit�
To use the direct drain, you must remove the cover and pierce the safety dam with
a pointed long object (screwdriver if necessary)�
65