Sonnenkonig SECCO 200 Manuel De L'utilisateur page 62

1� Power indicator light
The power indicator light will light up in green when the unit is plugged in,
regardless of whether the unit is operating or not�
2� Water full indicator light
The water full indicator light will turn on in red when the drainage tank is
full� if the light is on, empty the water from the drainage tank and make sure
the tank is properly positioned again�
3� Swing Indicator Light
EN When the swing indicator light turns on, the louver will swing�
4� Timer indicator light
The timer indicator light will turn on in green when you have programmed
the times for the unit to turn on and turn off automatically�
5� Setting indicator light
The setting indicator light will light up in green when you are setting the
humidity level�
6� High indicator light
The high indicator light will light up in green when you program the unit to
run the fan at high speed�
7� Low indicator light
The low indicator light will light up in red when you program the unit to run
the fan at low speed�
Humidity Level, Timer, Digit display
The digit indicator features three functions:
1. When the unit is plugged in, it will indicate the room humidity
level�
2. When you set the humidity level, it will indicate the humidity level you
have selected�
3. When you program the time for the unit to turn on and off, it will
show the time�
4. When the room humidity is lower than 35%, it will show "LO"�
5. When the room humidity is higher than 95%, it will show "HI"�
62