SICK MSM Mode D'emploi page 23

Les langues disponibles

Mounting Instructions

MSM

Combination Possibilities

MSM Model

MSM Standard yes

MSM Override

*) Can be combined with MSLE xx-1xxxx as of serial number

9710xxxx

1. Ensure that MS LE is disconnected from the power supply.

2. Remove the terminal compartment (1) of the MSLE by

loosening the 4 fixing screws (Fig. 1, Appendix).

3. Ensure the MSLE configuration:

Using the Configuration Table (Fig. 2 or 3) check if the DIP

switches of the MS LE (2) are set according to the desired

unit function.

Furthermore, with the coded version of MSLE, check that

the code is set in accordance with the transmission code.

4. Set the desired muting function using the 8X DIP switch (3)

in the MSM according to the Configuration Table in the MSM

Operating Instructions.

5. Connect the 4-pin ribbon cable (4) of the MSM to the 4-pin

cable connector of the MSLE.

6. Connect the MSM and MSLE. Ensure that the 4-pin

interconnecting cable is routed properly.

7. Join the MSM and MSLE so that the interface fits tightly.

Secure the connection by tightening the hexagon socked

screws (5) of the mounting rails.

8. Connect the terminal compartment (1) to the MSM using

4 fixing screws.

MSLE

Not coded

Coded version

yes