Factory Reset; Warranty; Owner Information - Monitor Audio Gold W12 Manuel De L'utilisateur

Factory Reset

Sometimes it may be necessary to carry out a
factory reset. If this needs to be done, it can be
done by the following.
1. Enter Bootloader, refer to the Bootloader Mode
section.
2. When in Bootloader mode illustrated by the
below LED pattern, press and hold the Control
Dial again.
3. As you are holding the Control Dial down, the
LEDs will count down starting with the below
pattern and then finish by flashing twice. When
it flashes the Control Dial can be released.
14
4. After being reset, the Gold W12 will go into
standby mode.

Warranty

Both the craftsmanship and the performance of this
product is covered by the manufacturer's warranty
against manufacturing defects provided that the
product was supplied by an authorised Monitor
Audio retailer under the consumer sale agreement.
For the period of cover please refer to the product
page on our website: monitoraudio.com for the
product you have purchased.
When purchasing Monitor Audio products, please
keep your receipt of purchase safe, as this validates
your warranty.

Owner Information

Product Details
Product Serial No:
Date of Purchase:
Dealer Details
Dealer Name:
Address:
Post code:
E-mail address:
Gold W12