Specifications - Monitor Audio Gold W12 Manuel De L'utilisateur

Specifications

Model
System Format
Lower Frequency Limit
Upper Frequency Limit
Drive Unit Complement
Linear Driver Excursion
Amplifier Output (watts)
Amplifier Classification
DSP
Digital Conversion
LED UI Control Panel
Global Settings
(via SubConnect)
User Presets
(via SubConnect)
User Equalisation
(via SubConnect)
Room Correction EQ
Night Mode
Phase Control
Low Pass Filter Alignment
Auto Sensing Input
Requirements
Digital Volume Level
IR Remote Control Code
SubConnect
(PC Application)
Audio Input/Outputs
Long-throw 12" driver featuring 'dished' C-CAM cone.
Dual 200 mm ABR (auxiliary bass radiator) 25 mm M.D.F. construction with internal bracing and sealed
Music preset: -3 dB @ 19 Hz/ -10 dB @ 16 Hz (In Room)
Assignable Low Frequency Limit Protection Filterdefault (-3 dB @ 12 Hz)
1 x 12" C-CAM subwoofer driver featuring triple suspension and 3" long throw voice coil
19 mm Peak to Peak. Total displacement 1.6 Litres
Class D with high current Switch mode power supply (SMPSU)
50 MHz DSP Core with 1024 instructions per sample, 138 dB of dynamic range and 56-bit double precision
processing, dynamically updated by a 40 MHz MCU
24 bit/ up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core
Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim & Mute,
Display Brightness (0 - 100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment
(Power On/ Off or Preset select), Input gain (Master -80 to +20 dB, Trim -11 to +11 dB, Mute), Phase (0 –
360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On/ Off (Enable Signal Sense, Always
4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope
Order (-12 or -24 dB/ Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6 dB), EQ mode (Impact, Music, Movie
or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On/ Off), Night Mode (On/ Off)
6 fully controllable EQ filters and 4 default filters with gain offset per preset, Default settings: Flat/ Music/
6 System controlled parametric EQ filters set using advanced detection algorithm.
Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)
Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic
range reduction lowering the level of loud sections
0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees
2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz
Line Level >1mV on unbalanced and balanced inputs.
Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes
-11 to +11 dB in 1 dB increments, Via the control panel. -80 to +20 in 1 dB increments, via SubConnect application
Supplied IR remote. Front facing IR receiver with red LED indication
Windows (7 onwards) (32/ 64 bit) compatible setup application available from the Monitor Audio website.
Allows the user to control advanced subwoofer setup features.
Settings can be saved while not connected to the subwoofer for off-site setup
LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA)
LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)
monitoraudio.com
Gold W12 Subwoofer
amplifier compartment
-3 dB @ 25 Hz/ -10 dB @ 20 Hz (Free Field)
-3 dB @ 150 Hz
600 W
LPF, Phase, Preset Select
On, Time to Off 5 – 240 minutes)
Movie/ Impact
15