FactoryReset; Guarantee - Monitor Audio CUSTOM Serie Guide D'utilisation Du Propriétaire

2. If it isn't already, you will receive a prompt asking for
the Subwoofer to be put into Bootloader mode. For
information on how to do this refer to page 6. Follow
these steps and when you have re-established connection
to the Subwoofer click on Tools > Firmware Update again
and you will see a new prompt. Click on Update.
3. A progress bar will now be displayed showing the status
of the update.
4. When it is complete you will receive confirmation and the
subwoofer will reboot (when you click on OK). If there is
a signal going into the subwoofer, it will automatically
start up. If there is no signal, the subwoofer will need to
be woken up by pressing the Preset button.
8

FactoryReset

Sometimes it may be necessary to carry out a factory reset.
By carrying out the factory reset, all adjustable parameters on
the sub will return to their default values. It is recommended
where possible to save your settings within the application
before doing the reset.
Where necessary, to perform a factory reset:
1. Enter Bootloader mode (refer to page 6)
2. When in Bootloader mode (illustrated by all preset LED's
being illuminated), press and hold the Preset button
again.
3. As you are holding the button down, the LEDs will go out
one by one. When the last one has gone out, the button
can be released.
4. After being reset, the subwoofer will go into standby
mode.

Guarantee

Both the craftsmanship and the performance of this product
is guaranteed against manufacturing defects for the period
of two years from the date of purchase (see conditions in
the Important Safety Instructions booklet), provided that the
product was supplied by an authorised Monitor Audio retailer
under the consumer sale agreement.
To verify your manufacturer's warranty, please visit the online
registration form at: www.monitoraudio.com
CUSTOM SUBWOOFER