Stihl FCS-KM Notice D'emploi page 5

Use only high quality tools and
accessories in order to avoid the risk of
accidents and damage to the machine.
STIHL recommends the use of genuine
STIHL tools and accessories. They are
specifically designed to match the
product and meet your performance
requirements.
The deflector on this power edger
cannot protect the operator from all
objects thrown by the cutting blade
(stones, glass, wire, etc.). Such objects
may ricochet and then hit the operator.
Never attempt to modify your machine in
any way since this may increase the risk
of personal injury. STIHL excludes all
liability for personal injury and damage
to property caused while using
unauthorized attachments.
Do not use a pressure washer to clean
your power tool. The solid jet of water
may damage parts of the power tool.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete free-
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi-
nation, do not wear a
work coat.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
FCS-KM
Wear steel-toed safety
boots with non-slip soles.
WARNING
To reduce the risk of eye
injuries, wear close-fit-
ting safety glasses in
accordance with Euro-
pean Standard EN 166.
Make sure the safety
glasses are a snug fit.
Wear hearing protection, e.g. earplugs
or ear muffs.
Wear a face shield and make sure it is a
good fit. A face shield alone does not
provide adequate eye protection.
Wear heavy-duty work
gloves made of durable
material (e.g. leather).
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Transporting the Power Tool
Always shut off the engine.
Carry the power tool properly balanced
by the drive tube – cutting blade in front
of you.
Do not touch hot parts of the machine
since burn injury will result.
Transporting by vehicle: Properly secure
your power tool to prevent turnover, fuel
spillage and damage.
English
3