Yamaha F4 Manuel De L'utilisateur page 60

Maintenance
9. Hold the carrying handle and the hand-
grip on the front side of the bottom cowl-
ing and lift up the outboard motor using
two people to dismount it from the boat.
1
1. Carrying handle
2. Handgrip
To transport the outboard motor
When transporting or storing the outboard
motor while removed from a boat, it is recom-
mended that you use an outboard motor
stand.
54
To transport the outboard motor horizontally
When transporting the outboard motor on its
2
side, observe the following precautions.
ZMU06821
 Tighten the clamp screws completely and
place a mat or something similar under the
outboard motor. Otherwise, the outboard
motor could be damaged or vibration dur-
ing transport could cause a small amount
of oil or cooling water to leak out. NOTICE:
Do not place the outboard motor on its
side before the cooling water has
drained from it completely. Otherwise,
water may enter the cylinder through the
exhaust valve and cause engine trouble.
[ECM05010]
 If the front side of the outboard motor is
facing down, turn the clamp bracket 90° so
that it does not contact the ground, and
then turn the steering friction adjuster
clockwise to secure the bracket.
ZMU06835
ZMU06761
ZMU06806