3
1. Engine shut-off switch
2. Engine shut-off cord (lanyard)
3. Clip
2.
Close the air vent valve and air vent
screw.
1
1. Air vent valve
1. Air vent screw
3.
Align the fuel cock with the closed posi-
tion.
1
2
ZMU06867
1. Closed position
4.
1
ZMU07627
1
1. Fuel hose
2. Fuel joint cap
5.
ZMU07444
6EE-F4591-00
After stopping the engine, disconnect
the fuel hose from the fuel joint on the
outboard motor, and then install the fuel
joint cap. WARNING! When not using a
portable fuel tank, make sure to install
the fuel joint cap. Otherwise, injury
could result from striking the fuel joint
accidentally.
[EWM02412]
Disconnect the fuel hose from the fuel
joint on the fuel tank.
Operation
1
1
ZMU06871
1
2
ZMU06753
45