Publicité
Les langues disponibles
Les langues disponibles
V3.5
SAFETY
WARNING! Read and understand all instructions before using this generator. The operator must follow basic
precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a
possibility of property damage, injury or death if certain instructions are not followed.
WARNING!
This notice indicates a specific hazard or unsafe practice that could result in severe personal
injury or death if the proper precautions are not taken.
CAUTION!
This notice indicates a potentially hazardous situation that may result in minor or moderate injury if
proper practices are not taken.
NOTICE!
This notice indicates that a specific hazard or unsafe practice will result in equipment or property
damage, but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well lit and free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the reach of children.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection for the eyes.
2.
Wear gloves that provide protection based on the work materials or to reduce the effects of tool vibration.
3.
Non-skid footwear is recommended to maintain footing and balance in the work environment.
4.
Steel toe footwear or steel toe caps to prevent injury from falling objects.
5.
Wear protective clothing designed for the work environment and tool.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the moving parts of a tool. Keep long
hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance enables better control in
unexpected situations
Visit www.princessauto.com for more information
Hydraulic Pipe Bender with Tripod
8524290
3
Publicité
