Instrument Self-Test - Mettler Toledo SevenCompact S220 Mode D'emploi

2. Export Settings to a USB-stick
With this feature the user can export the settings. These can for example be sent via e-mail to a
cus t omer service representative in case difficulties occur, so that it is easier for the customer ser-
vice representative to provide support.
1 Insert the USB stick into the corresponding interface of the meter
The icon appears on the display
2 Select the item and Export Settings to USB-Stick in the service menu to start the transfer
The settings will be in text (extension .txt) format. The instrument will create a new folder on the
USB-stick in which the name is the date in the international format, i.e. first year, then month and
then the day.
Example: when the data is 25 November 2011, the name of the folder will be: 20111125.
The data will be written as a text file with a name that consists of the time in 24h format (hr min
sec) with the prefix S.
Example: when settings are exported at 15:12:25 (3:12:25 pm) the name of the file will be:
S151225.txt
Pressing EXIT during the exporting aborts the process
3. Factory Reset
When the factory reset is performed, the instrument will revert back to the original settings when
the instru m ent left the factory. All data will be lost and the PIN is set-back to the original PIN
"000000".
5.8 I nstrument self-test
The instrument self-test requires user interaction.
1 In the Setup menu, select "6. Instrument Self-test".
Selecting the menu item starts the self-test routine.
2 Press the function keys on the keypad one by one in any order.
The self-test result is displayed after a few seconds.
The meter returns to the system settings menu automatically.
●
The user needs to finish pressing all seven keys within two minutes, otherwise "Self-test
failed!" appears and the procedure has to be repeated.
●
If error messages repeatedly appear, contact METTLER TOLEDO Service.
Setup 27