Entering Ids / Pin; Editing Values In A Table - Mettler Toledo SevenCompact S220 Mode D'emploi

1 Press
move downwards.
2 Press READ to confirm the entry.
The line where the position of alphanumeric character is being entered blinks.
3 To end and confirm entry, use softkeys to highlight screen key OK, and press READ to save
the ID.
— or —
4 To delete information, use softkeys to highlight
entered character.
— or —
5 Press EXIT to return to the upper level of the menu.
The entries are rejected.
4.8.2 E ntering IDs / PIN
The four softkeys and READ key are used for navigating on the keypad and entering the ID/PIN.
Example: WATER
1 If 1 is highlighted, press
Q is highlighted.
2 Press
W is highlighted.
3 Press READ to enter W.
4 Repositioning the highlighted bar to A, T, E and R, and press READ to enter each letter of sam-
ple ID in sequence as described in steps 1 - 3.
5 Reposition the highlighted bar to OK, and press READ to save the sample ID.
Instead of entering an ID with the alphanumeric keypad, one can also use a USB-keyboard or a
USB-barcode scanner. In case a character is entered or scanned that is not present on the instru-
ment keyboard it will display the entry as an underscore (_).
4.8.3 E diting values in a table
The meter has a feature, which allows the user to enter, edit or remove values in tables. (for exam-
ple, temperature and buffer values for a customized buffer group). This is accomplished by using
the softkeys on the display to navigate from cell to cell.
18 Operating the meter
to move left to highlight number or letter, use
once.
once.
to move right, and
and press READ to delete the previously
to