Mettler Toledo SevenCompact S220 Mode D'emploi page 27

1. Language
The following languages are available for the system: English, German, French, Spanish, Italian,
Por t uguese, Chinese, Japanese, Korean and Russian.
2. Time and date
When starting the meter for the first time, the display for entering time and date appears auto m at i -
cal l y.
In the system settings, two time and four date display formats are available:
●
Time
24-hour format (for example, 06:56 and 18:56)
12-hour format (for example, 06:56 AM and 06:56 PM)
●
Date:
28-11-2010 (day-month-year)
11-28-2010 (month-day-year)
28-Nov-2010 (day-month-year)
28/11/2010 (day-month-year)
3. Access control
PIN settings are available for:
1. System settings
2. Deleting data
3. Instrument login
1 Switch PIN protection for the required access control ON. The window for entering an alphanu-
mer i c PIN appears.
2 Enter an alphanumeric PIN (max. 6 characters).
The input window for PIN verification appears.
3 Confirm PIN.
A maximum of 6 characters can be entered as PIN. In the factory default settings, the PIN for sys-
tem settings and deleting data is set to 000000 and is activated, no instrument login password is
set.
4. Beep
An acoustic signal can be switched on in the following three cases:
1. Key is pressed
2. Alarm/warning message appears
3. Measurement is stable and has endpointed (stability signal appears)
5. Expert/Routine modes
The meter has two working modes:
●
Expert mode: the factory default setting enables all functions of the meter.
●
Routine mode: some of the menu settings are blocked.
The concept of the two working modes is a GLP feature that ensures that important settings and
stored data cannot be deleted cannot be unintentionally changed under routine working conditions.
The meter only allows the following functions in the routine mode:
Setup 25