Grundfos SE1 50 Instructions page 39

VI: Tuyên bố tuân thủ EC/EU
Chúng tôi, Grundfos, tuyên bố trong phạm vi trách
nhiệm duy nhất của mình rằng sản phẩm SE1 50,
80, 100, SEV 65, 80, 100, mà tuyên bố dưới đây có
liên quan tuân thủ các Chỉ thị Hội đồng sau về việc
áp dụng luật pháp của các nước thành viên EC/EU.
• Machinery Directive (2006/42/EC).
Standards used:
EN 809: 1998 + A1:2009
• Low Voltage Directive (2014/35/EU).
Standard used:
EN 60335-1:2012 + A11:2014
EN 60335-2-41:2003 + A1:2004, A2:2010
• EMC Directive (2014/30/EU)
Standards used: EN 61326-1:2013
• RoHS Directives (2011/65/EU and 2015/863/EU)
Standard used:
EN IEC 63000:2018
• ATEX Directive (2014/34/EU)
Applies only to products intended for use
potentially explosive environments, Ex II 2GD,
equipped with the separate ATEX approval plate
and EU-type examination certificate. Further
information, see below.
Certificate No.
KEMA 04ATEX2201X
Notified body: DEKRA Certification B.V. No 0344 Meander 1051, 6825 MJ Arnhem, The Netherlands
Manufacturer: Grundfos Holding A/S, Poul Due Jensens Vej 7, 8850 Bjerringbro, Denmark
This EC/EU declaration of conformity is only valid
when published as part of the Grundfos safety
instructions (publication number 98948763).
Székesfehérvár, 16 February 2021
Standards used
EN IEC 60079-0:2018, EN 60079-1:2014,
EN 60079-7:2015 + A1:2018,
EN 60079-18:2015 + A1:2018,
EN 60079-31:2014, EN ISO 80079-36:2016,
EN ISO 80079-37:2016
Róbert Kis
Technical Product Owner
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EC/EU declaration of
conformity.
939