KTM Power Parts 76012992044 Mode D'emploi page 7

9
5
8
6
NOTE:
The arrangement of the individual parts is shown in the drawing below.
- Mount 1x right retaining bracket (14) (included) and 1x left retaining
bracket (15) (included) on the GPS navigator mounting plate (3) (included)
using the Torx hex socket screws M5x10 (12) (included) and nuts DIN985
M5 (11) (included).
- Mount the silent block (16) (included) on the retaining brackets on the
right (14) and left (15) (included) using the nuts DIN985 M5 (11) (inclu-
ded).
- Mount 1x right retaining bracket (14) (included) and 1x left retaining
bracket (15) (included) on the GPS navigation device using the Torx screws
M5x14 (13) (included) and nuts DIN985 M5 (11) (included).
- Position the premounted GPS navigator mounting plate (3) (included) on
the premounted GPS navigation device.
NOTE:
The position of the GPS navigation device can be adjusted on the vehicle
before securing it (Figure D).
D
- Secure the GPS navigation device on the premounted GPS navigator moun-
ting plate (3) (included) using the Torx screws M5x14 (13) (included) and
toothed washer 5.3 DIN 6797 (10) (included).
16
15
3
1
4
7
2
14
13
10
11
7
12