KTM Power Parts 76012992044 Mode D'emploi page 6

3 13 12
16
15
9
8
1
1
8
6
6
7
11
10
2
4
7
6
5
17
4
B
A
9
1
C
Scope of supply:
1x GPS navigator bracket (1)
1x cap for the GPS navigator bracket (2)
1x GPS navigator mounting plate (3)
4x collar bushings 8.2x14.5x10.5 (4)
4x bushings 8.2x23x12 (5)
1x locking cylinder set (6)
4x bushings 13x8.2x4.5(7)
4x absorbing elements (8)
4x collar screws M8x50 (9)
4x toothed washers 5.3 Din 6797 (10)
12x nuts DIN985 M5 (11)
8x Torx hex socket screws M5x10 (12)
4x Torx screws M5x14 (13)
2x retaining brackets, right (14)
2x retaining brackets, left (15)
4x silent blocks 15x15 M5x8 (16)
Assembly
- Insert the absorbing element (8) (included) in the GPS navigator bracket
(1) (included).
- Insert the bushing 8.2x23x12 (5) (included).
- Insert the locking cylinder (6) (included) in the GPS navigator bracket (1)
and secure with the clamp (17) (included).
- Insert the collar bushings 8.2x14.5x10.5 (4) (included) in the bottom of
the absorbing elements (8) that have already been mounted.
- Remove the screws of the fork triple clamp.
NOTE:
Depending on the model, the motorcycle is equipped either with a one-part
clamp (Figure A) or a two-part clamp (Figure B).
- Insert the bushings 13x8.2x4.5 (7) (included) into the top of the clamp
(Figure C).
NOTE:
These bushings are not required for the two-part clamp (Figure B).
- Position the GPS navigator bracket (1) and mount with the collar screws
M8x50 (9) (included).
NOTE:
Torque, see Owner's Manual.
76012992070
60003098000
0035080506
0797050000
0985050003
58605083010
58605083014
76311056000