Dustbane Hurricane 700 XTT Mode D'emploi page 21

Fuses: Replacement
To replace the fuses in the control panel of the machine, proceed as follows:
• Stop the machine and press the emergency button (fig. 8, ref. 2); engage the parking brake by means of the pedal
(fig. 8, ref. 12);
• Remove the fuse cover (fig. 20, ref. 1);
• With the tweezers supplied with the machine take out the blown fuses and replace them with new ones of the same
amperage;
• Reclose the fuse cover;
The fuse FU7 must NOT be fitted if the machine is provided with gel batteries.
To replace the fuses inside the electrical box, proceed as follows:
• Stop the machine and press the emergency button (fig. 8, ref. 2); engage the parking brake by means of the pedal
(fig. 8, ref. 12);
• Remove the bonnet (fig. 2, ref. 4);
• Remove the cover of the electrical box (fig. 21, ref. 1);
• With the tweezers supplied with the machine take out the blown fuses and replace them with new ones of the same
amperage;
• Re-close the cover of the electrical box;
• Refit the bonnet;
Operations Manual Hurricane 700 XTT / Hurricane 850 XTT
21