Depaepe PXB41A Notice D'utilisation page 25

SecurAccess SIP Basic Line – User Guide
WAN
Reply To ICMP
WAN Http Access
PC Port
The SecurHD IP operates in three modes:
DHCP mode:
All the field values for the Static IP mode are not used (even though they
are still saved in the Flash memory.)
The SecurHD IP acquires its IP address from the first DHCP server it
discovers on its LAN.
The DHCP option is reserved for NAT router mode.
Static IP mode:
Configure all of the following fields: IP address, Subnet Mask, Default
Gateway address, Primary DNS , Secondary DNS.
PPPoE:
To use the PPPoE feature, set the PPPoE account settings.
The SecurHD IP establishes a PPPoE session if any of the PPPoE fields are
set.
If set to "Yes", the SecurHD IP will respond to the PING command from
other computers, but it also is vulnerable to the DOS attack. Default is No.
If this parameter is set to "No", the HTML configuration update via WAN port
is disabled.
Allow to use the internet port as bridge or as router.
25