Depaepe PXB41A Notice D'utilisation page 17

SecurAccess SIP Basic Line – User Guide
Account Status
Account Active
Primary SIP Server
Failover SIP server
Second Failover Sip Server Optional, used when failover SIP Server no response.
Prefer Primary SIP Server
Outbound proxy
Backup Outbound Proxy
SIP Transport
NAT Transersal
Label
SIP User ID
Authenticate ID
Authenticate Password
Name
DNS Mode
Indicates whether accounts are registered to the related SIP
server(s).
When set to Yes the FXS port is activated
Sip.mycompany.com or IP Adress.
This field contains the URI string or the IP address (and port, if
different from 5060) of the SIP primary server.
Examples : sip.my-voip-provider.com, or sip:my-company-sip-
server.com, or 192.168.1.200:5066
Optional, used when primary server no response.
This field contains the URI string or the IP address (and port, if
different from 5060) of the SIP failover server.
Examples : sip.my-voip-provider.com, or sip:my-company-sip-
server.com, or 192.168.1.200:5066
This field contains the URI string or the IP address (and port, if
different from 5060) of the SIP Second failover server.
Examples : sip.my-voip-provider.com, or sip:my-company-sip-
server.com, or 192.168.1.200:5066
Optional, used when failover SIP Server no response.
Yes – will register to primary server if failover registration expires.
This field contains the URI string or the IP address (and port, if
different from 5060) of the outbound proxy.
If there is no outbound proxy, this field SHOULD be left blank. If
not blank, all outgoing requests will be sent to this outbound proxy.
proxy.myprovider.com or IP Address.
This is usually set as IP Address
Default is UDP.
This parameter defines whether or not the SecurHD IP NAT
traversal mechanism is activated.
If activated (by choosing "Yes") and a STUN server is also specified,
then the SecurHD IP performs according to the STUN client
specification. Using this mode, the embedded STUN client will
detect if and what type of firewall/NAT is being used.
If the detected NAT is a Full Cone, Restricted Cone, or a Port-
Restricted Cone, the SecurHD IP will use its mapped public IP
address and port in all of its SIP and SDP messages.
If the NAT Traversal field is set to "Yes" with no specified STUN
server, the SecurHD IP will periodically (every 20 seconds or so)
send a blank UDP packet no payload data) to the SIP server to keep
the "hole" on the NAT open.
The name show on the LCD of the current device.
SIP service subscriber's User ID.
SIP service subscriber's Authenticate ID.
Can be identical to or different from SIP User ID.
SIP service subscriber's account password.
SIP service subscriber's Label which will be used for Caller ID
display.
Choice of the DNS mode.
17