Depaepe PXB41A Notice D'utilisation page 23

SecurAccess SIP Basic Line – User Guide
Send Anonymous
Anonymous Call
Rejection
Check SIP User ID
Auto answer
Allow Auto Answer By
Call-Info
Turn off Speaker on
remote disconnect
Session Expiration
Min-SE
Caller Request Timer
Callee Request Timer
Force Timer
UAC Specify Refresher
UAS Specify Refresher
Force Invite
Hook Flash Timing
Refuse-Return-Code
Caller Display Source
If set to "Yes" a SUBSCRIBE for Message Waiting Indication will be
sent periodically.
If this parameter is set to "Yes", the "From" header in outgoing INVITE
message will be set to anonymous, essentially blocking the Caller ID
from displaying.
Default is No.
If set to Yes, incoming calls with anonymous Caller ID will be rejected
with 486 Busy message.
When the phone receive INVITE, at first it will check if it is right the
'To' in the message.
Enable or disable the 'auto answer' feature
Enable or disable 'auto answer' when some call use Call-info to
activate this feature.
When the remote user hang up, the phone will disable the speaker.
The SIP Session Timer extension enables SIP sessions to be
periodically "refreshed" via a SIP request (UPDATE, or re-INVITE).
Once the session expires, if there is no refresh via a UPDATE or re-
INVITE message, the session is terminated.
Session Expiration is the time (in seconds) at which the session is
considered timed out, provided no successful session refresh
transaction occurs before hand.
The default value is 180 seconds.
Defines the minimum session expiration (in seconds).
Default is 90 seconds.
If set to "Yes", the phone will use session timer when it makes
outbound calls if remote party supports session timer.
If selecting "Yes", the phone will use session timer when it receives
inbound calls with session timer request.
If set to "Yes", the phone will use session timer even if the remote
party does not support this feature.
If set to "No", the session timer is enabled only when the remote party
supports this feature. To turn off Session Timer, select "No" for Caller
Request Timer, Callee Request Timer, and Force Timer.
As a Caller, select UAC to use the phone as the refresher, or UAS to
use the Callee or proxy server as the refresher.
As a Callee, select UAC to use caller or proxy server as the refresher,
or UAS to use the phone as the refresher.
Session Timer can be refreshed using INVITE method or UPDATE
method.
Select "Yes" to use INVITE method to refresh the session timer.
The time break for hook flash
This setting decide the response when you reject a call automatically
or manually, phone will reject as Busy here (Phone is busy can't
answer), or Not found, or Temporarily unavailable.
Setting caller name display source, contain "FROM", "PAI-FROM", "PAI-
RPID-FROM", "RPID-PAI-FROM", "RPID-FROM"
23