Güde 85057 GAB 5A Mode D'emploi Original page 8

Introduction
To enjoy your new automatic battery charger as long as
possible, please read carefully the Operating Instructions
and the attached safety instructions before putting it into
operation. Further, we recommend keeping the Operating
Instructions in order to recall the product features in the
future.
To follow the continuous product development. we
reserve the right to make technical changes for any
further improvement.
This document represents the original Operating
Instructions.
Appliance description
The automatic battery charger is controlled by a
microprocessor, which ensures 3-level charging. Level 1
charges the battery at nearly constant rate up to app. 85%.
Level 2 charges the battery at constant rate to app. 95%.
Level 3 maintains the battery voltage at a constant level,
the battery is therefore fully charged.
GAB 5A (pic. A)
1. Control field
2. Charging tongs, black (-)
3. Charging tongs, red (+)
4. Feeder cable
GAB 5A controls (pic. B)
1. "Battery being charged" LED
(LED is on if the battery is being charged)
2. "Battery fully charged" LED
(LED is on if the connected battery is fully
charged)
3. "Failure" LED
(LED is on if the charged battery is connected
incorrectly or is faulty)
4. LED for the selected "12V battery for
motorbikes" charging mode
(mode for batteries with 1.2Ah-14Ah charge
rate DC14.4V/0.9A)
5. Selected "12V car battery" charging mode
LED
(mode for batteries with 14Ah-120Ah charge
rate DC14.4V/3.2A)
6. Selected "low temperature" charging mode
LED
(mode for batteries with 14Ah-120Ah charge
rate DC14.7V/3.2A)
The mode is recommended for charging at
temperatures within 5°C or for AGM batteries.
7. "STANDBY" LED
(LED is on if the appliance is switched on)
8. Charging voltage selection button
(the appliance switches to various operating
modes when the button is pressed)
Pressed 1 time: 1.2Ah-14Ah DC14.4V/0.9A
Pressed 2 times: 14Ah-120Ah DC14.4V/3.2A
Pressed 3 times: 14Ah-120Ah DC14.7V/3.2A
Pressed 4 times: STOP
Pressed 5 times: RESTART
Technical specifications
GAB 5A AUTOMATIC BATTERY CHARGER
Voltage/frequency:
Charging voltage:
Max. input:
Max. effect. charge rate:
Battery capacity:
Weight:
General safety instructions
Please read carefully these Operating Instructions.
Familiarise with the control elements and appropriate
appliance using. Keep the Operating Instructions for future
reference!
Safe working
The appliance to be used only on a connection with a
safety switch against stray current (RCD).
Keep the place of your work clean!
Mess in the place of your work may result in injuries.
Consider the environment influences
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide appropriate lighting.
Do not use the appliance near flammable liquids or gases.
Keep other persons in safe distance!
Do not let other persons, especially children, touch the
appliance and the cable. Keep them in a sufficient distance
from the place of your work.
Store the appliance properly!
An appliance that is not used should be stored in a dry,
locked place out of reach of children.
Do not overload the appliance!
Work in the specified output limits.
Use the right appliance!
Do not use the appliance for purposes for which it has not
been designed.
Look after your appliance!
Follow the maintenance regulations and instructions.
Check regularly the appliance cable and have it replaced
by an authorised professional if damaged.
Check regularly the extension cable and replace it if
damaged. Keep the handles dry, with no oil and grease.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the appliance when you are
tired.
WARNING!
Use of any other accessories may pose a risk of injury.
8
230V~50Hz
12 V
60 W
0.9A-3.2A
1.2Ah-120Ah
0.5kg