Télécharger Imprimer la page

Güde 85057 GAB 5A Mode D'emploi Original page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
necessarily be followed. Always wear protective glasses
and gloves for this work.
Step 2
First, connect the battery terminal that is not connected
to the chassis. Connect the second terminal to the body
in a sufficient distance from the battery and petrol feed
line. The charger can then be plugged.
If you intend to charge the battery outside the vehicle,
make sure the right polarity is provided for the
connection: red terminal: positive pole black terminal:
negative pole.
Step 3
Now plug the feeder cable.
Using the "MODE" button on the control panel,
select the expected charge rate intensity.
Pressed 1 time:
1.2Ah-14Ah/DC14.4V/0.9A
Pressed 2 times: 14Ah-120Ah/DC14.4V/3.2A
Pressed 3 times: 14Ah-120Ah/DC14.7V/3.2A
Pressed 4 times: STOP
Pressed 5 times: RESTART
Step 4
After charging, the charger automatically switches to the
charging maintaining mode. The charger may be
disconnected at any time in this mode.
Operating instructions
When not connected, the charging tongs are not under
voltage. The charger switches on only after being
connected to a 12 V battery and selecting the charging
mode.
Unlike a charger, this inverted charger works with a low
charge rate substation with such efficiency that the
charged battery gets hardly ever damaged. This results in
extending the charging time. High-rate charging is not
possible.
The given charging programme automatically selects the
appropriate charge rate for the battery just being charged.
Battery size
Selected
(Ah)
charging mode
2
8
14
20
60
100
120
*the given values are just of indication nature and may
therefore differ.
Marking
Product safety:
Prohibitions:
Warning:
Commands:
Environment protection:
Package:
Time (hours)
2
8
3
5
15
25
27
10
Product corresponds to
appropriate EU standards
No pulling the plug!
Warning/caution
Appliance to be put into
operation in dry places!
General command symbol
Dispose waste professionally
so as not to harm the
environment.
Faulty and/or disposed electric
or electronic appliances must
be taken to appropriate
collection centres.
Protect against moisture
Interseroh-Recycling
Protection class II
Protect against rain and
moisture!
Warning against dangerous
voltage
Please read the Operating
Instructions before using
the appliance
Packing cardboard material
may be delivered to
collecting centres for
recycling.
This side up

Publicité

loading