Optional Cylinder Holder (Bench Top) - MSA Galaxy Manuel D'instructions

Optional Cylinder Holder (Bench Top)

(FIGURE 2-3)
Figure 2-3. Optional Cylinder Holder (P/N 10062235)
1. On the left-hand side of the Test Stand, make sure all four barb
fittings are in place and straightened before connecting the cylinder
holder.
2. Press the cylinder holder and the test stand together until the
barbed fittings are inserted into the cylinder holder and the holes in
the flange line up.
3. Insert the screw into the front and back holes in the flange.
• Gas connections are automatic
• Connect the tubing to the demand regulator (P/N 710288).
2-3