Change Setup; Password; General Setup; Set Time - MSA Galaxy Manuel D'instructions

CHANGE SETUP

1. Access the menu by pressing ENTER when the Test Stand is idle
and displaying:
"CURRENT TIME/DATE -- <INSERT INSTRUMENT>".
2. From the menu, use the UP ( ) or DOWN ( ) to scroll to
"-CHANGE SETUP-".
3. Press ENTER ( ) to select this option.

PASSWORD

• After entering the Setup mode, a password prompt appears.
• The default password is "672".
1. Use the and
• Password can be changed or turned OFF in General Setup.

GENERAL SETUP

Set Time

Time is used for recordkeeping and updating instrument time, if desired.
•. Use , , and ENTER ( )
to update the current time in the Test Stand.

Set Date

Date is used for recordkeeping and updating instrument date, if desired.
•. Use , , and ENTER ( )
to update the current date in the Test Stand.

Set Overdue

• Use , , and ENTER ( ) to set the number of days between
calibrations.
• After this number of days, reports show instruments as
overdue for calibration.
until "672" displays; then, press ENTER ( ) .
3-3