Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
7.2
Electrical connection
D Electrical connection must be carried out by a qualified electrician
− according to the applicable VDE 0100 directives
− and the directives of the responsible power supply company.
D The flexible mains connection must be at least H 07 RN-F.
D An electric switch (mains switch)
− must be easily accessible and installed upstream.
− The switch must effectively disconnect the appliance at all poles from the mains.
− The contact opening must be at least 3 mm.
D For safety reasons, we recommend installing a > 10 mA residual-current circuit breaker
(RCCB).
D Observe the data on the type plate when making the electrical connection.
D Integrate the appliance into the equipotential bonding system. Its efficiency must be checked
in accordance with VDE 0190.
7.3
Connecting cables
Screws
36
Cable
inlet
Equipotent
ial bonding
connection
Panel
. Loosen screws and remove cover.
. You require an "energy optimisation assem-
bly kit" for connecting an energy optimising
unit.
. Securely connect the mains connection
cable at the customer's premises.
D Do not use a mains plug!
. Close the panel.
Publicité
Table des Matières
