Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
2.4
Water supply
The water filling process must be supervised!
Rotary switch for
power levels and
modes
Drain
tap
28
Water supply
(add-on equipment)
Level mark
Rotary switch for
mains on and
temperature
setting
Rotary switch for water
supply (add-on
equipment)
Preparatory work
. Open the hinged top cover.
. Close the drain tap.
. Open the water tap provided on-site.
Allow water to run in
. Set rotary switch for "Mains on and tem-
perature setting" to the lowest tempera-
ture.
D The green indicator lamp lights up.
. Turn rotary switch for "Water supply" by a
click stop to the left or right.
D Water runs in.
. When the desired quantity of water has run
in or the highest fill level (level mark "−6")
has been reached, turn back the "Water
supply" rotary switch by one click stop to
zero.
Setting the temperature and the power
level
. Set the desired temperature using the rotary
switch for "Mains on and temperature set-
ting".
. Set the desired power and mode using the
rotary switch for "Power levels and
modes".
D The yellow indicator lamp lights up while the
appliance heats up.
Publicité
Table des Matières
