Technical Data; Unpacking - Scheppach CAG115-20ProS Traduction Des Instructions D'origine

Careful handling and use of battery devices
• Charge the batteries only in chargers that are
recommended by the manufacturer. Risk of fire
if a charger that is suitable for a specific type of
battery is used with other batteries.
• In the power tools, use only the batteries de-
signed for the purpose. The use of other batter-
ies may result in injuries and risk of fire.
• Keep the unused battery away from paper
clips, coins, keys, nails, screws and other small
metal objects, which could cause bridging of
the contacts. A short circuit between the battery
contacts may cause burns or fire.
• If used incorrectly, liquid may leak from the
battery. Avoid contact with this. In the event of
accidental contact, rinse off with water. If the
liquid gets into eyes, seek medical assistance.
Leaking battery fluid may cause skin irritations
or burns.
• Ensure that the device is switched off before
inserting the battery. Inserting a battery into a
power tool that is switched on may result in acci-
dents.
• Recharge the batteries indoors only because
the battery charger is designed for indoor use
only. Risk of electric shock.
• To reduce the electric shock hazard, unplug the
battery charger from the mains before cleaning
the charger.
• Do not subject the battery to strong sunlight
over long periods and do not leave it on a heat-
er. Heat damages the battery and there is a risk of
explosion.
• Allow a hot battery to cool before charging.
• Do not open up the battery and avoid mechani-
cal damage to the battery. Risk of short circuit
and fumes may be emitted that irritate the res-
piratory tract. Ensure fresh air and seek medical
assistance in the event of discomfort.
• Do not use non-rechargeable batteries. This
could damage the appliance.
Residual risks
The machine has been built according to the state of
the art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the „safety in-
structions" and the „Proper use" are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine.
• Use the tool that is recommended in this manual.
This ensures that your machine performs optimally.
• Hands may never enter the processing zone when
the machine is in operation.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

7. Technical data

Motor power supply:
Rated speed:
Max. wheel diameter:
Bore diameter:
Mounting spindle thread:
Weight:
Subject to technical changes!
Noise and vibration
m WARNING
Noise at the workplace can exceed 85 dB (A). In this
case, noise protection measures are necessary for
the user (wear hearing protection!).
Noise output in dB
Sound power level L 87.1 dB(A) (EN ISO 3744)
WA
Sound pressure level L 76.1 dB(A) (EN ISO 11201)
pA
Uncertainty K 3 dB(A)
wa/pA
Vibration value
Vibration a 2.9 m/s²
h
Uncertainty K 1.5 m/s²
h

8. Unpacking

• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans-
port damage. Inform the transport agent imme-
diately of any faults. Later complaints cannot be
considered.
• If possible, store the packaging until the warranty
period has expired.
• Familiarize yourself with the machine with the help
of the operating instructions manual before using
it.
• Use only original parts for accessories as well as
consumables and spare parts. Spare parts can be
obtained from your specialist retailer.
• Please quote our article numbers as well as type
and production year in all your orders.
m WARNING
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of
swallowing and suffocation!
20 V
8000 min-1
ø 115 mm
22 mm
M 14
1.8 kg
GB | 25