Syncing Two Bases - Ergomotion e Serie Manuel Du Propriétaire

syncing two bases

If simultaneous operation of two bases is desired, use the SmartSync® Cord
STEP 1
Unplug base from power source .
STEP 2
Connect the ends of the SmartSync® cord to the
Multifunction port on each control box .
to connect the electronics of both bases together.
SmartSync® Cord
STEP 3
Plug base back into the power source .
STEP 4
Check to ensure all cords are securely attached . Both
remotes will now operate both bases simultaneously (If
the remotes become unpaired, see page 23) .
25