Emergency Battery Backup Strap - Ergomotion e Serie Manuel Du Propriétaire

emergency battery backup strap

Store the Battery Backup Strap in a convenient location for emergency use.
(2) 9 Volt batteries are required to operate the power down feature and are NOT included.
It is recommended to attach batteries to the battery backup strap only when its use is required, and that batteries
be removed when the battery backup strap is no longer in use .
In the event that the base is stuck in an articulated position during a power outage-
The Battery Backup Strap can only be used to bring the base to a flat position.
It will not bring the base to a flat position when the base is connected to a working power source.
STEP 1
Disconnect the Power Supply from the input power cord .
STEP 2
Locate the Battery Backup Strap and connect it to (2) Alkaline 9 Volt
batteries (not included) . Do not mix brand name Batteries .
STEP 3
Connect the end of the Battery Backup Strap to the input power cord that is attached to the control box .
STEP 4
Return the base to a flat position using the remote control .
Note: Detach the Battery Backup Strap after the emergency is over, as the system will continue to draw power
from the batteries even if not in use .
22
FOR EMERGENCY USE ONLY.
the Battery Backup Strap will return the base to a flat position.