Nuna Mixx Next Mode D'emploi page 9

Brake
1
- To lock the rear wheels, step down on the red area on
the brake lever. (27)
2
- To unlock the rear wheels, step down on the green area
on the brake lever. (28)
Always apply the brake when the stroller is stopped.
Push the stroller slightly to ensure the brake is engaged.
Handle
The handle has 3 positions.
1
- To adjust the height of the handle, press the handle
adjustment buttons (29)-1 and pull the handle up or
down. (29)-2
Recline Adjustment
There are 5 recline positions for the backrest.
1
- To raise or lower the backrest, squeeze the recline
adjustment button, and pull the seat up or down. (30)
Calf Support
The calf support has 2 use positions.
1
- To raise the calf support, lift up. (31)
2
- To lower the calf support, press the adjustment buttons
on the sides (32)-1, and push down. (32)-2
MIXX next instructions
Insert
The insert can be removed to provide a mesh seating area for
better ventilation during hot weather.
1
- To remove the insert, release the velcro on insert from
the back of the seat, unbuckle the harness, thread the
harness through the harness slots and remove the seat
pad. (33)
DO NOT remove the backrest tube.
Reverse Seat
The seat can be used rear or forward facing.
1
- Squeeze the seat release buttons and lift the seat up.
(34)
2
- Turn the seat in the opposite direction and place on the
seat mounts until it clicks into place. A "click" sound
means the seat is attached. (35)
Check to make sure seat is securely attached by pulling
up on it.
Fold
Before folding, push the canopy to the rear of the stroller.
1
- Squeeze the recline adjustment button on the back of
the seat (36)-1 and rotate the backrest to the stored
position. (36)-2
2
- Pull up on the folding buttons (37)-1 and push the stroller
forward to fold. (37)-2
3
- Lock the stroller by tucking the storage latch onto the
storage mount. (38)
MIXX next instructions