Stihl BR 500 Notice D'emploi page 11

Adjusting the Control Handle
1
2
3
Move the control handle (1) along
N
the blower tube (2) to the most
comfortable position.
Secure the control handle (1) with
N
the screw (3).
Engage the throttle cable (4)
N
with sleeve (5) in the retainer (6).
BR 500, BR 550, BR 600
Wear Mark on Nozzle
The front end of the nozzle is worn by
ground contact during operation.
Replace the nozzle when it has worn as
far as the wear mark.
Fitting the Transport Aid
When storing or transporting the
machine:
Secure the velcro strip to the blower
N
tube – pull the flap through the
buckle.
Secure the blower tube to the
N
handle on the backplate.
English
9