Removing And Replacing The Fuel Tank - Sherco SE 4.5if Manuel Du Propriétaire

REMOVING AND REPLACING THE FUEL TANK

1
3
4
2
To remove the fuel tank
- Unscrew the tank's central screw 1
- Unscrew the right and left lower inlet
screws 2
Wear appropriate eye protection, gloves
and use a cloth
- Disconnect the fuel pump's wiring har-
ness pin 3
- Loosen the two hose clamps securing
the fuel supply hose 4.
- Disconnect the fuel supply hose.
This operation should be performed
when the engine is cold
- Drain any remaining fuel into the cloth
- Lift the tank upwards.
In the event of fuel being splashed into
the eyes or swallowed
CONSULT YOUR DOCTOR
WARNING
NOTE
WARNING
89