Riding; Parking - Sherco SE 4.5if Manuel Du Propriétaire

R I D I N G
Cold start
1. Turn the ignition key to start position (on the right).
2. Using the gear shift lever place the transmission in neutral
3. Start the motor by pressing on the start button, without accelerating.
4. Let the engine warm up for a few minutes.
Warm start
Follow the previous instructions but omit step 4.
- Accelerate the engine slightly after it starts
Changing gears
- The gear shift lever positions are shown page 58
- To find neutral, push down on the pedal until it is in first gear (you will feel a resis-
tance to further movement). Lift up slightly on the pedal.
1. Close the throttle and pull in the clutch lever.
2. Step on the gear shift lever.
3. Smoothly open the throttle and slowly release the clutch lever.
4. Once you have reached the proper speed, shift into the next higher gear.

Parking

- Stop the engine and remove key.
Give yourself time to learn the controls
and their functionsbefore using the vehicle.
78