Sherco SE 4.5if Manuel Du Propriétaire page 77

1
2
3
SHOCK ABSORBER
Shock absorber compression
Toothed wheel 1 controls fast compres-
sion (major impacts)
Screw 2 controls slow compression
(sensitivity).
turning them clockwise (+) increases the
compression and vice-versa.
Standard adjustment
Toothed wheel: Turn clockwise to the
stop, then back off 12 clicks
Screw : Idem
Shock absorber rebound
- The rebound is adjusted by turning
the black ring 3 at the base of the
shock absorber There are 10 adjust-
ment possibilities
- If you require a softer rebound, turn
the black ring in the direction of the
arrow marked (-).
- If you require a firmer rebound, turn
the black ring in the direction of the
arrow marked (+).
Standard adjustment: Turn clockwise
to the stop, then back off 7 clicks
Checking play in link rods
With the bike supported by a suitable
stand, press the top and bottom of the
back wheel.
If any play is found, please contact your
Sherco dealer.
75