Removing And Replacing The Front Wheel - Sherco SE 4.5if Manuel Du Propriétaire

REMOVING AND REPLACING THE FRONT WHEEL

1
3 3
- Unscrew the two screws 1 and nut 2
- Loosen the two screws 3
- Remove the axle from the right side
- Remove the wheel
- Reverse the procedure. greasing the
1 2
axle, with grease.
Check that the screws 1 and 3 and the
nut 2 are fully tightened
- Degrease the disc with solvent
- Prime the brake
Refer to table page 95
To remove the front wheel
To replace the front wheel
WARNING
NOTE
Torque
87