Riding Position - Sherco SE 4.5if Manuel Du Propriétaire

1
1
2
70

RIDING POSITION

- The bike comes with the handlebars in
the forward position. To change to the
rear position:
- Remove the handlebar
- Loosen the bottom bolts
- Turn the asymétricclamps around 180°.
- The handlebar can also be directed
respect to handlebar clamps.
- The screw 1, allows you to adjust the
position of the lever.
- If you turn it clockwise the lever moves
away from the grip.
- If you turn it counter clockwise the
lever moves closer to the grip.
At rest the screw should have in pressu-
re on the piston. Leave free play (move-
ment) minimum of 1 mm
Handlebar position adjustment
Clutch lever adjustment
WARNING
Throttle control
- The throttle control has two set-
tings: slow action or quick action
To change the setting
- Reverse the cable position 1 on the
throttle twist grip 2
Quick action: "CROSS" side of the
axis of the bike
Slow Action: "ENDURO" side of the
axis of the bike