Setting The Level Detection Device - Oase Profi Clear Premium Compact L US Notice D'emploi

- EN -
5.1.1

Setting the level detection device

A rise in the water level during operation indicates that the system is contaminated. The level detection
device signals possible soiling to the control system and the cleaning cycle is started.
The water level in the filter system is independent of the water level in the pond. The water level in the
filter system is dependent upon the circulation capacity. Therefore it may be necessary to adjust the level
detection device.
The level detection device can be fitted in two positions.
► Position 1: Suitable for circulation capacities greater than 3963 gph (15000 l/h) (delivery condition).
► Position 2: Suitable for circulation capacities lower than 3963 gph (15000 l/h) and fewer automatic
cleaning intervals.
How to proceed:
 O
1. Undo both lock nuts. Remove nuts and Allen screws.
2. Move the level detection device according to the hole pattern and fix in place with Allen screws and
lock nuts. Tighten both nuts.
28